One shop, start to finish.
We measure, draw, build, install and finish our own work in Mississauga, so no dimension goes missing in a handover between companies.
Most joinery passes through four companies before it is hung. Every handover is a chance for a dimension to drift.
Assembled in our shop first
Every carcass is made, assembled and checked in the shop before it is taken apart again for delivery.
- Sides cut and edged
- Bottom and top fixed
- Back panel squares the box
- Shelf and door fitted
Who we work with
Homeowners
Kitchens, built-ins and panelling, with drawings to approve before anything is built.
Designers and architects
Your design, resolved into shop drawings and built to the detail you drew.
Builders and contractors
Millwork packages priced from tender drawings and installed to your programme.
Restaurants and offices
Bars, counters and reception desks that open on time and stand up to daily use.
How we work
Measure
We come to the room and template it as it really is: the lean of every wall, the fall of the floor, and the services hidden behind them.
Draw
Plans and elevations show every door, panel, profile and handle. You approve them before a single board is cut, which is where changes are cheap.
Build
Everything is made, finished and dry fitted in our Mississauga shop, so problems are found on the bench instead of in your room.
Install
The same team installs, scribes to the walls and finishes in place, then hands back a room that looks as if it was always that way.
What we will not do
A few things that keep the work honest.
Quote per foot
A price per linear foot describes an average room, not yours. We price from measured drawings.
Cut before you approve
Nothing goes through a saw until you have signed off the drawings, finishes and hardware.
Hide a bad measure
No filler strip doing the work a site measure should have done. We scribe to the wall.
Hand the install to strangers
The people who built it install it, so the drawing and the room meet in one head.
Frequently
asked
Straight answers on cost, lead time and how a job actually runs. If something is not covered here, ask and we will answer it the same way.
Every question we get askedDo you build in your own shop?
Yes. Everything is made and dry fitted in our shop in Mississauga before it goes to site, and the same team installs it.
Can I visit the shop?
Yes, by appointment, so someone is free to walk you through drawings, samples and the work on the bench.
Do you handle installation and finishing?
Yes. We install, scribe to the walls and finish on site rather than handing a flat pack to somebody else.
Do you work with designers, architects and contractors?
Yes. We build from design drawings, produce shop drawings for approval, and work to the contractor's schedule and site rules.
Visit the shop.
Drawings, samples and work in progress all live in one building near Pearson. Visits are by appointment so someone is free to walk you through what is on the floor.
Tell us about the room.
Send drawings, a photo or just the dimensions. We come back with a measured quote, not a per foot guess.
What affects the costWhat are you planning?
Get a quoteNo obligation to go ahead. Measured in your room. Built in our own shop.